PowerDrop Wicking grade...

 Extremely low viscosity. Wicks and penetrates.

Very fast setting. Ideal for post application on pre-assembled parts.

Due to it's extremely low viscosity, this product will be supplied with a small extension tip for very accurate control when applying the adhesive.

Viscosity - 3 CPS

Approximate setting time - 1-3 seconds (Dependant on materials)

Supplied in a 10 gram easy to use soft botte.

For bonding and bridging larger gaps, filling of joints, holes, gaps & cracks.

 The mineral powder only cures when the wicking grade is applied to it.

Once the wicking grade is introduced, there is no time for corrections as the powder sets instantly.

You can then continue to build upon this, layer by layer. The surface can be painted, drilled and sanded.

Supplied in a 15 gram easy to use soft botte.

Below are images of how PowerDrop Powder and Wicking can be used.

Application

Either apply the Powder or Wicking first. The Wicking immediately reacts with the Powder. After the reaction, there is no time to make any corrections. Apply in layers of approximately 200 and make sure that the Powder is completely saturated with PowerDrop Wicking. Repeat adding Powder and Wicking grade if necessary. Blind off holes or corners with tape. After hardening, remove the tape. The material can be mechanically processed after approximately 3 minutes, sanding, painting, etc.