Filla-Glu Wicking & Coloured Powda

Filla-Glu Wicking grade.

Extremely low viscosity. Wicks and penetrates.

Very fast setting. Ideal for post application on pre-assembled parts.

Due to it's extremely low viscosity, this product will be supplied with a small extension tip for very accurate control when applying the adhesive.

Viscosity - 3 CPS

Approximate setting time - 1-3 seconds (Dependant on materials)

For bonding and bridging larger gaps, filling of joints, holes, gaps & cracks.

The mineral powder only cures when the wicking grade is applied to it.

Once the wicking grade is introduced, there is no time for corrections as the powder sets instantly.

You can then continue to build upon this, layer by layer. The surface can be painted, drilled and sanded.

Application

Either apply the Filla-Glu Powda of Filla-Glu Wicking first. The Filla-Glu Wicking immediately reacts with the Powda. After the reaction, there is no time to make any corrections. Apply in layers of approximately 200 and make sure that the Powda is completely saturated wiith Filla-Glu Wicking. Repeat adding Powda and Wicking grade if necessary. Blind off holes or corners with tape. After hardening, remove the tape. The material can be mechanically processed after approximately 3 minutes, sanding, painting, etc. 

Below are images of how Filla-Glu Powda and Wicking can be used.

New Filla-Glu Coloured Powda